Netplan Network Configuration Tutorial for BeginnersNetplan Network Configuration Tutorial for Beginners

How does it work?

Netplan Design Overview

Netplan reads network configurations from /etc/netplan/*.yaml, written by administrators, installers, cloud image instantiations, or other OS deployments. During early boot, Netplan generates backend-specific configuration files in /run to hand off control of devices to a particular networking daemon.

Netplan currently works with these supported renderers.

Software requirements and conventions used

CategoryRequirements, Conventions or Software Version Used
SystemUbuntu 20.04 (Focal Fossa)
SoftwareNetplan (installed by default)
OtherRoot permissions to modify configuration files
ConventionsRequires given linux-commands to be executed with root privileges either directly as a root user or by use of sudo command to be executed as a regular non-privileged user

Netplan configuration files

There are three locations in which Netplan configuration files can be placed; in order of priority they are:

  1. /run/netplan
  2. /etc/netplan
  3. /lib/netplan

Network Manager

Network Manager aims for Network Connectivity that “Just Works”. The computer should use the wired network connection when it’s plugged in, but automatically switch to a wireless connection when the user unplugs it and walks away from the desk. Likewise, when the user plugs the computer back in, the computer should switch back to the wired connection. The user should, most times, not even notice that their connection has been managed for them; they should simply see uninterrupted network connectivity.

More information about Network Manager is available in Gnome website and wiki .

Inside each of these directories configurations are created using files with the .yaml extension which are processed in lexicographical order, regardless of the directory they are in.

Directory priority has a role only when files with the same name exist: in those cases, only the file contained in the directory with the higher priority is parsed.

If a boolean or scalar parameter is defined in more than one configuration file, it will assume the value defined in the last file that is parsed; if the values are sequences, instead, they are concatenated.

Users are supposed to place their configurations inside the /etc/netplan directory; by default the only file present on a fresh installed Ubuntu 20.04 system is /etc/netplan/01-network-manager-all.yaml. In the next section we will see the instructions it contains, and what is their meaning.

The /etc/netplan/01-network-manage-all.yaml file

The only configuration file existing /etc/netplan/ directory on a fresh installed Ubuntu 20.04 system is 01-network-manage-all.yaml. Let’s take a look at its content:

# Let NetworkManager manage all devices on this system
network:
  version: 2
  renderer: NetworkManager

As suggested by the comment in the file, the configuration is meant to set all the network interfaces on the system to be managed by the NetworkManager renderer. We can observe that directives are indented inside the main node, network. Since we are dealing with yaml files, the indentation is crucial.

Another two keywords we can find in the file are version and renderer: the former specifies the syntax version in use, the latter the system backend (networkd vs NetworkManager).

In the next section of this tutorial we will create a slightly more complex configuration example, and we will use it to assign a static IPv4 address to a network interface.

A Configuration example – setting a static IPv4 address

The configuration file we saw above is quite basic; let’s try something a little bit more complex and see how can we configure a static IPv4 address using Netplan.

The first thing we must to do is to create a new configuration file, to be parsed after the default one: let’s call it /etc/netplan/02-static-ip.yaml. Inside the file, we create a rule to match the network interface(s) we want to setup: we can accomplish the task by using the match stanza.

Inside the match section, we can select a series of physical interfaces on the base of the value of the specified properties. For the settings to be applied all the properties must be matched by the rule.

In the configuration file we write:

# Set static ip address for enp1s0 interface
network:
    version: 2
    renderer: NetworkManager
    ethernets:
        id0:
            match:
                name: enp1s0
            dhcp4: false
            addresses:
                - 192.168.122.250/24
            nameservers:
                addresses:
                    - 192.168.122.1
            gateway4: 192.168.122.1

Let’s take a closer look to the new instructions we used in the configuration. Inside the main network node, devices can be grouped by their type:

  • ethernets
  • wifis
  • bridges


Since in our example we our dealing with an ethernet device we used ethernets stanza. Inside the match stanza, we referenced the interface by its nameenp1s0. Match rules can also be based on macaddress and, only when using networkd as the renderer, on driver which is the Linux kernel driver name used for the device(s).

To reach our desired configuration, we used a series of directives. Since we want to assign a static address, we disabled dhcp4 and used the addresses keyword to associate an IPv4 address to the interface. Multiple address can be specified: they must be provided together with the subnet mask.

We also set the addresses of the nameservers in the stanza with the same name. Finally, we set the IPv4 address of the gateway the interface should use with the gateway4 keyword.

Simplifying the configuration

The configuration we used in the example above can be slightly simplified. To reference the interface we want to assign the static address to we used the match stanza, however, we could have omitted it. Since we want our settings to be applied to just one specific device, we can reference it directly using its predictable name (enp1s0) as id:

network:
    version: 2
    renderer: NetworkManager
    ethernets:
        enp1s0:
            dhcp4: false
            addresses:
                - 192.168.122.250/24
            nameservers:
                addresses:
                    - 192.168.122.1
            gateway4: 192.168.122.1

When the match stanza is used, the id (id0 in the previous example) is arbitrary and its used to reference the configured device(s) from other sections of the configuration file. When the match stanza is omitted, instead, the id must correspond to the device predictable name. When working with virtual devices such as bridges or bonds, the id is not used to reference an existing interface, but represents the name that should be used when the interface is created.

At this point our configuration is ready; all we should do is to save it and test it.

Testing and applying a Netplan configuration

In the previous section we saw how to create a simple Netplan configuration to provide a static IPv4 address for a network interface. Now it’s time to test the configuration, to see if it works correctly. To achieve our goal we can use the netplan utility and the try subcommand.

The try subcommand of the netplan utility, as its name suggests, is used to try a configuration, and optionally roll it back if the user doesn’t confirm it after a certain amount of time. The default timeout is of 120 seconds but it can be changed using the --timeout option.

As you can see from the output of the ip address command, the current IPv4 address for the enp1s0 interface is 192.168.122.200:

$ ip address|grep enp1s0
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    inet 192.168.122.200/24 brd 192.168.122.255 scope global dynamic noprefixroute enp1s0

Let’s apply the configuration:

$ sudo netplan try

Once we run the command, the following prompt appears on screen:

Do you want to keep these settings?
Press ENTER before the timeout to accept the new configuration
Changes will revert in 120 seconds

We have enough time to very if the IP address of the interface changed:

$ ip address|grep enp1s0
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    inet 192.168.122.250/24 brd 192.168.122.255 scope global dynamic noprefixroute enp1s0


As we can see, the IPv4 address changed as expected. In this case, however after the timeout expired, the command failed to revert the configuration. This is a a known problem, reported also in the manpage of the utility. In such cases, to fully revert to the initial state, a reboot should be enough.

Two other commands can be used:

netplan generate
netplan apply

The netplan generate command converts the settings in the yaml files to configurations appropriate to the renderer in use, but does not apply them. In the vast majority of cases it is not meant to be called directly: it is invoked, for example, by netplan apply which additionally applies the changes without a “revert” timeout.

Conclusion:

In this academic, we approached Netplan, a utility developed by Canonical, that is active via default on Ubuntu 20.04 Focal Fossa. The purpose of this utility is to abstract configurations for network interfaces the use of a yaml configuration files.

Those configurations are then translated into configurations for the specified renderer, which include NetworkManager or networkd. in this tutorial we saw how to write a simple rule to set a static IP address for a network interface, we found out some of the nodes that may be utilized in configuration files, and we saw how to apply adjustments via the netplan try and netplan apply commands. right here we slightly scratched the surface of what can be executed with the usage of Netplan in case you desire to understand more about it, please check the Netplan website, and on the software manpage.

Please enter CoinGecko Free Api Key to get this plugin works.